View or Change the Trek's Settings
After you use genie to set up the Trek, you can log in to the Trek to view or
change its settings.
¾ To log in to the Trek:
1. Connect your computer or WiFi device to the Trek.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included) to
connect your computer to the LAN port on the Trek.
• To connect with WiFi, use the Trek's network name (SSID) and
WiFi password, which are on the sticker near the Internet Mode
switch. For more information, see
with WiFi
2. Launch a web browser.
3. Enter www.routerlogin.net in the address field of the browser.
A login screen displays.
4. Enter admin for your user name and password for your password.
The BASIC Home screen displays.
.
on page 16
Connect Devices to Your Trek
17