3. Set the Internet Mode switch to Wireless.
4. Connect your computer or WiFi device to the Trek.
You can use an Ethernet cable or connect with WiFi:
• For a wired connection, use an Ethernet cable (not included) to
connect your computer to the LAN port on the Trek.
• To connect with WiFi, use the Trek's, network name (SSID) and
WiFi password, which are on the sticker near the Internet Mode
switch. For more information, see
with WiFi
5. Launch a web browser.
6. Enter www.routerlogin.net in the address field of the browser.
The Wireless as WAN screen displays, which shows the available WiFi
networks.
7. If a login screen displays, do the following:
a.
Enter admin for your user name and password for your
password.
The BASIC Home screen displays.
.
on page 16
Connect Devices to Your Trek
12