NETGEAR Trek PR2000 Quick Start Manual page 14

15. Connect your Trek to a power source and rotate the antenna.
For more information, see
16. If your computer or WiFi device disconnects from the Trek, reconnect
your computer or WiFi device to the Trek.
Use the Trek in Router Mode
You can connect the Trek to a DSL or cable modem and use the Trek as a
router.
Internet
¾ To use the Trek in router mode:
1. Connect you Trek to a power source and rotate the antenna.
For more information, see
2. Connect your DSL or cable modem to the Internet/LAN port on the
Trek with an Ethernet cable.
Set Up Your Trek
DSL or
cable
Modem
Ethernet cable
Set Up Your Trek
on page 6
Trek
on page 6
14