Wire Clone - Maas AHT-28-V User Manual

except [
5) FM radio storage
Under FM frequency mode, press [
the channel number for storage blinks at the right of the screen.
press [ ] or [
channel number, press [
receiving mode.
6) FM radio channel delete:
Under FM memory mode, turn off the radio, press [
on the radio, you will see "DEL ?" in the screen and the channel
number blinks. press [
number you want to delete, press [
operation, you can delete all memory channel, 25 in maximum.
8)

WIRE CLONE

Prepare 2sets of AHT-28-V/AHT-78-U, 1pcs specific wired cloning cable.
Master radio (sending messages when in wired cloning)
Deputy radio (receiving and storing messages when in wired cloning)
Steps of wired clone
1) The deputy radio normally power on. Connect master and deputy
one with the wired cloning cable.
2) Press PTT and [
] or [ ] and [
] or use number key to select the desired
] to confirm and then back to the
] or [
] to turn on the master radio, enter the wired
] to exit.
] and then press[
] to choose the channel
] to confirm. Repeat this
],
] to turn
47