Tone Calling (1750Hz); Channel Storage/Delete - Maas AHT-28-V User Manual

5) TONE CALLING (1750Hz TONE)
To access a repeater, press and hold in [
of time specified by the repeater. The transmitter will automatically
be activated, and a 1750Hz audio tone will be superimposed on the
carrier. Once access to the repeater has been gained, you may
release [ ] key and use PTT for activating the transmission.
6) CHANNEL STORAGE AND DELETE
Channel Storage
Under VFO mode, input desired frequency by keypad directly or
select one by pressing [
[ ], the digits blinks at the right top of LCD, press number to
input desired channel directly or press [
desired one, then press [
Note: after you input desired channel number, if it blinks, it means
that this channel is already occupied, you can choose another
one.
e.g.: to store the frequency: 450.325MHz with CTCSS: 151.4 to the
channel 05, the step are as follows:
1) Under VFO mode, input 4-5-0-3-2-5
44
] key for the amount
] or [ ], and then press [
] or [
] for storage.
] +
] to choose