Fm Radio Function - Maas AHT-28-V User Manual

7)

FM RADIO FUNCTION

1) On/off radio receiver
Under standby mode, press [
display "70.00M", then press [
Note: under FM radio mode, if receiving the signal, the radio will be out
of FM mode, after 5S, it will be back to FM mode when the signals
disappear.
2) Mode selection:
Under FM radio mode, press [
mode and FM frequency mode (this function is unavailable when
there is not FM memory channel)
3) Frequency selecting
Under FM frequency mode, input the digits directly by keypad or
press [ ] or [
memory mode, press [
4) FM radio search:
Under FM radio mode, press [
again to enter FM radio scanning, you will see " RADIO SEEK.UP "
in the screen, press [
Radio will stop scanning when frequency is available and then exits.
If you rotate the encoder knob, it will scan again; press any key
46
] to open FM radio function, LCD
] again, radios receiver is off.
] to switch between FM memory
] to choose the desired frequency. Under FM
] or [ ] to choose the desired channel.
] + [
] or [ ] to change scanning direction.
], then press [ ]