Advanced Functions; Ptt Id Setting - Maas AHT-28-V User Manual

ADVANCED FUNCTIONS

1) PTT ID SETTING

PTT ID (Programmed by software)
This transceiver supports two optional signalings, MSK and DTMF. DTMF signaling only
supports encoding.
Set transmitting and receiving frequency in advance and then program PTT ID via
software, click in sequence: Program → Optional Features → PTT ID setting. And click
the ANI (mark √). You can input character in BOT and EOT.
If select MSK, you can choose from 0-9, 4 digits in maximum for BOT; for EOT, you can
choose from 0-9 and A-Z, 6 characters in maximum. While select DTMF, for BOT, you
can choose from 0 to 9 and A to D, 7 characters in maximum. For EOT, you can choose
from 0-9 and A-Z and 7 characters in maximum. You can select "BOT, EOT, or BOTH,
then save to the radio.
42