Removing The Lower Oven Element - LG LSE3092ST Service Manual

REMOVING THE LOWER OVEN ELEMENT

REMOVING THE LOWER OVEN ELEMENT
! WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
!
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
To Remove Lower oven Drawer :
! CAUTION
• Turn power OFF before removing
the Lower oven Drawer :
1. Open the drawer to the fully opened position.
2. Remove the 2 screws (right and left side). (refer
to below picture)
3. Locate glide lever
on each side of
drawer, push
down on the left
glide lever and pull up on the right glide lever.
Lever
Push down with finger
4. Pull the warming drawer away from the range.
COMPONENT ACCESS
Remove screw
Lever
Push up with finger
To Remove Lower oven Broil Element :
1. Pull the range away from the wall.
2. Remove the 3 screws from the upper
bracket and 2 screws from the rear bracket
2 rear bracket screws 2 rear bracket screws 2 rear bracket screws
2 rear bracket screws 2 rear bracket screws
2 rear bracket screws 2 rear bracket screws 2 rear bracket screws 2 rear bracket screws 2 rear bracket screws 2 rear bracket screws
2 rear bracket screws 2 rear bracket screws 2 rear bracket screws
4. Remove 2 screws of the lower oven element
cover and disconnect wires from the terminal.
To Remove Lower oven Broil Element :
1. Pull the range away from the wall.
2. Remove the 5 screws from the bottom and rear
bracket.
2 rear bracket screws 2 rear bracket screws 2 rear bracket screws
2 rear bracket screws 2 rear bracket screws
2 rear bracket screws 2 rear bracket screws 2 rear bracket screws 2 rear bracket screws
2 rear bracket screws 2 rear bracket screws 2 rear bracket screws 2 rear bracket screws 2 rear bracket screws
2 bottom bracket screws
2 bottom bracket screws 2 bottom bracket screws 2 bottom bracket screws 2 bottom bracket screws
2 bottom bracket screws 2 bottom bracket screws 2 bottom bracket screws 2 bottom bracket screws
2 bottom bracket screws 2 bottom bracket screws 2 bottom bracket screws 2 bottom bracket screws
2 bottom bracket screws
3. Remove 2 screws of the lower oven element
cover and disconnect wires from the terminal.
3-18
3 Upper bracket screws
3 Upper bracket screws 3 Upper bracket screws 3 Upper bracket screws 3 Upper bracket screws
3 Upper bracket screws 3 Upper bracket screws 3 Upper bracket screws 3 Upper bracket screws
3 Upper bracket screws 3 Upper bracket screws 3 Upper bracket screws 3 Upper bracket screws
3 Upper bracket screws