Advertisement
USING THE "EMERGENCY STOP BUTTON"
On the side of the integrated control box is a large red
button. If you depress the "EMERGENCY STOP" button,
this will bypass the handset and stop the lift. The button
will lock in place until released. To release the
EMERGENCY STOP button and resume operation, turn
the button counter-clockwise until it pops out.
THE LIFT WILL NOT FUNCTION AGAIN UNTIL THE
EMERGENCY STOP BUTTON IS RELEASED!!
CHARGING THE BATTERY:
Before using the AquaTRAM PT Lift for the first time the 24V CONTROL/BATTERY
must be fully charged. This will take about 24 hours on the charger. It is also
recommended that the battery be fully charged before each use.
To recharge the battery, unplug all
cables and remove the 24V
CONTROL/BATTERY from the lift.
Plug the 24V CONTROL/BATTERY
into the charger as shown. When the
charger is plugged in the orange
CHARGE light will flash. When the
battery is fully charged, the CHARGE
light will stay on and the device is
ready to use.
CAUTION! THE UNIT WILL NOT CHARGE IF
THE EMERGENCY STOP BUTTON IS
DEPRESSED.
PLUGS NOT SEATED
PLUGS FULLY SEATED
7
Advertisement
