Advertisement
If the lift stops moving over the water and is stuck:
4. Try pushing the "EMERGENCY UP" button:
A. If the lift gets stuck out over the water press the "EMERGENCY
UP" button and hold it down. Under normal conditions this will
bypass the HANDSET and return the lift to the deck. Note that the
lift will not return if the battery is not sufficiently charged or if the
control unit is not working. The "EMERGENCY UP" button is
normally used only when the HANDSET does not function.
NOTE: if the battery is fully charged and the plugs are fully seated
(as described above) and the "EMERGENCY UP" button works but
the HANDSET does not, chances are that the HANDSET is
malfunctioning and may need to be replaced. Check the HANDSET
and its cord and plug for damage or corrosion. Always keep the
HANDSET, the cords and plugs, and the CONTROL unit clean and
dry when not in use.
PRESS AND HOLD THE "EMERGENCY UP" BUTTON TO RETURN TO THE
DECK WHEN THE HANDSET DOESN'T FUNCTION.
WARNING! NEVER STORE THE 24V CONTROL BOX OR THE HANDSET ON
THE FLOOR OR IN A WET OR DAMP ENVIRONMENT. DO NOT LEAVE THEM
OUTDOORS FOR EXTENDED PERIODS OF TIME. KEEP THEM AS CLEAN
AND DRY AS POSSIBLE! REMOVE THE 24V CONTROL BOX BEFORE
CLEANING THE LIFT. DO NOT SPRAY WATER DIRECTLY ONTO THE 24V
CONTROL BOX!
18
Advertisement
