Advertisement
First make sure the 24V Control & Battery unit is fully charged.
If the lift doesn't move when the handset button is pressed:
When you can't get the lift to move check the following things:
1. Make sure the battery is fully charged:
Unplug the MOTOR CABLE and the ACTUATOR CABLE from the 24V
CONTROL BOX. Plug the 24V CONTROL BOX into the charger and
look for the
When the orange light goes from flashing to static-on the battery is fully
charged. Make sure the "EMERGENCY STOP" button is NOT
depressed, or else THE BATTERY WILL NOT CHARGE!
When charging the battery
the top
orange light
flash, which means the
battery is being charged.
When fully charged the
orange light will stay on.
THE EMERGENCT STOP BUTTON SHOULD LOOK LIKE THIS
TROUBLESHOOTING GUIDE
charge light to illuminate on the front of the unit.
ORANGE
will
15
NOT LIKE THIS!!!
Advertisement
