Related Manuals for XVision SDC4
Summary of Contents for XVision SDC4
-
Page 1: Quick Guide
QUICK GUIDE This document contains preliminary information and subject to change without notice. SDC4/SDC8 4/8 Camera DVR with Real Time D1 Resolution Recording... -
Page 2: Table Of Contents
INDEX 1. Contents.................3 2. Hard Disk Installation............4 3. Front Panel Controls.............6 4. Rear Panel Connectors............7 5. Live Operations..............9 6. Playback Operations............11 7. PTZ Operations..............13... -
Page 3: Contents
1. CONTENTS 1. DVR 2. Quick Start Guide 3. IR Remote Control 4. Battery 5. Installation CD 6. Screws 7. Power Adaptor 8. SATA Cable... -
Page 4: Hard Disk Installation
2. HARD DISK INSTALLATION Step 1) Take out the screws as shown in the pictures below: Back panel 3 screws Left side 1 screw Right side 1 screw Step 2) Follow the direction of the arrow to open the cover. - Page 5 Step 3) Connect the SATA and power cables to the Hard Disk. Step 4) Fix the Hard Disk with four screws on the bottom case as shown below Step 5) Put the cover back and fix it with 5 screws as shown in Step 1. Note: After installation, please format the Hard Disk before you start recording.
-
Page 6: Front Panel Controls
3. FRONT PANEL CONTROLS SDC4 (4 CHANNEL DVR) FRONT PANEL CONNECTORS 1. Power LED Indicates DVR power is on. 2. LAN LED Indicates LAN is working. 3. PLAY LED Indicates DVR is playing back. 4. REC LED Indicates DVR is recording. -
Page 7: Rear Panel Connectors
4. REAR PANEL CONNECTORS SDC4 (4 CHANNEL DVR) REAR PANEL CONNECTORS 1. DC 12V 12V DC power jack. 2. VIDEO OUT MAIN/SPOT monitor (BNC Video output). 3. VIDEO IN Camera inputs (BNC Video input). 4. AUDIO IN Phono input (For Channel 1). - Page 8 SDC8 (8 CHANNEL DVR) REAR PANEL CONNECTORS 1. VGA VGA port. 2. 12V DC 12V DC power jack. 3. MAIN/SPOT monitor MAIN/SPOT monitor (BNC Video output). 4. VIDEO IN Camera inputs (BNC Video input). 5. AUDIO IN Phono input (For Channel 1). 6.
-
Page 9: Live Operations
5. LIVE OPERATIONS You can monitor all the channels, listen to audio signal and have some related operations under LIVE mode. This following describes the IR remote control, mouse operation and on-screen graphical icons under LIVE mode. Table 5-1 Functions of remote control under LIVE mode Button Description Start/Stop recording. - Page 10 Table 5-2 Graphical icons displayed after right-clicking your mouse under LIVE mode. Icon Description Resting the cursor on this icon will bring up the following four menu icons. Main menu Search menu Backup menu PTZ mode Turn on/off recording Playback Resting the cursor on this icon will bring up the following five display icons.
-
Page 11: Playback Operations
6. PLAYBACK OPERATIONS Table 6-1 Description of on-screen graphical icons in LIVE mode. Icon Description Indicates Recording is on Indicates Live Audio is on Indicates Live Audio is off Indicates Motion has been detected on the channel Indicates Video loss has been detected on the channel Indicates a USB device has been detected Indicates the DVR is connected to the LAN Film Normal Recording... - Page 12 Table 6-2 Remote control functions under the PLAYBACK mode. Icon Description ENTER/ MODE Switch to full screen, quad display. MENU / Turn on/off PAUSE. PLAY Playback at normal speed. / SLOW Playback at slower speed. The speed will be slowed to 1/2, 1/4, 1/8, and 1/16 by each press of the button till the slowest limitation of 1/16 of the normal speed.
-
Page 13: Ptz Operations
7. PTZ OPERATIONS Under LIVE mode, press PTZ to enter PTZ camera mode. The function icons will appear in the bottom right corner of the screen. Drag to other locations on the screen with the mouse. Table 7-1 Remote Control functions under the PTZ mode Button Description / SLOW... - Page 14 Table 7-2 Mouse operation under the PTZ mode Icon Description Click to Exit PTZ Mode and go back to the LIVE mode. Preset number N. (0-255). Go to preset number N. Set current PTZ location at preset number N. TOUR - press to activate pre-set tour*. PIP - Set current PTZ location as the start of tour scan*.