Standards; Interface; Software Notices; Open Source Software License - Epson WorkForce 435 User Manual

Standards

Safety
UL60950-1
CAN/CSA C22.2 No. 60950-1
EMC
FCC part 15 Subpart B class B
CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modification of the product. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing.

Interface

One USB 2.0 Hi-Speed (Device Class for computers), Type B port

Software Notices

OPEN SOURCE SOFTWARE LICENSE

1) This printer product includes open source software programs listed in Section 6) according to
the license terms of each open source software program.
2) We provide the source code of the GPL Programs, LGPL Programs and Apple Public Source
License Programs (each is defined in Section 6) until five (5) years after the discontinuation of
same model of this printer product. If you desire to receive the source code above, please see the
"Contacting Customer Support" in Appendix or Printing Guide of this User's Guide, and contact
the customer support of your region. You shall comply with the license terms of each open source
software program.
3) The open source software programs are WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
See the license agreements of each open source software program for more details, which are
described in OSS.pdf on your Printer Software CD-ROM.
4) OpenSSL toolkit
This printer product includes software developed by the OpenSSL project for use in the OpenSSL
Toolkit (http://www.openssl.org/).
169