Mitel 7100 Installation Manual page 25

connected to the serial port of the device you wish to access.
Through the 7100 MAP E/M/S, you can access SX-2000 and SX-200 Customer Data
Entry, from which you can access CDE forms and conduct maintenance sessions.
1. Double-click the dial-up connection to the 7100 MAP icon on your desktop.
The 7100 MAP will verify your username and password. Note that the 7100
MAP will only allow remote access to the "engineer."
2. Click Start, and then click Run.
3. Type either telnet xxx.xxx.xxx.x 4001 or telnet xxx.xxx.xxx.x 4002 (where x
is the PPP IP address, and 4001 or 4002 is the serial port on the 7100 MAP
E/M/S that is connected to the serial device you wish to access).
You see the login page of the SX-2000 or SX-200 CDE.
- 21 -
Installation Guide