Dial-Up Access To Ops Manager Via The 7100 Map; Dial-Up Access To 6500 Unified Communications Via The 7100 Map E/M/S; Dial-Up Access To An Sx-2000 Or Sx-200 Pbx Via The 7100 Map E/M/S - Mitel 7100 Installation Manual

7100 MAP
3. Telnet to the PPP address of the 7100 MAP plus the number of the serial port
(either 4001 or 4002) that connects to the managed device. For example, type
telnet xxx.xxx.xxx.x 4001 (where x is the PPP address of the 7100 MAP).
The VxWorks shell opens.

Dial-up access to OPS Manager via the 7100 MAP

The 7100 MAP provides access to the OPS Manager server but not to any of its
network elements (devices managed by OPS Manager). If you need to manage any
of these network elements, they must be added to the 7100 MAP device's list of
managed devices, and you must access them separately and directly through the
7100 MAP.
Note: You must configure the default gateway of the 7100 MAP device if the network
element is on a different subnet. From the main configuration menu, go to System
Settings, and configure the default gateway.
You must have an OPS Manager account to access the server. If you have a valid
accound, with access to OPS Manager via the 7100 MAP, you can conduct MAC
(Moves, Adds, and Changes) sessions as well as backups and restores of the OPS
Manager database.
To access the OPS Manager server
1. Double-click the dial-up connection to the 7100 MAP icon on your desktop.
The 7100 MAP will verify your username and password. Note that the 7100
MAP will only allow remote access to the "engineer."
2. Launch a browser.
3. If you do not have a bookmark for OPS Manager, type xxx.xxx.xxx.x/ops
(where x is the direct or proxy IP address of OPS Manager), and press ENTER.
This brings you to the OPS Manager server login page.
Note: OPS Manager may take some time to load.

Dial-up access to 6500 Unified Communications via the 7100 MAP E/M/S

1. Double-click the dial-up connection to the 7100 MAP icon on your desktop.
The 7100 MAP will verify your username and password. Note that the 7100
MAP will only allow remote access to the "engineer."
2. Launch a browser.
3. Type xxx.xxx.xxx.x/default.asp (where x is the IP address of the device you
wish to access), and press ENTER.
You see the 6500 Unified Communications login page.

Dial-up access to an SX-2000 or SX-200 PBX via the 7100 MAP E/M/S

You can access a serial device only if a serial port on the 7100 MAP E/M/S is
- 20 -