Fujitsu Eternus Connection Manual page 11

Chapter 3 Setting Up the Server
> 3.1 Creating a WWN Instance Management Table for the Server
4-2
5
6
6-1
7
This completes the "WWN instance management table for the server".
P3AM-4562-01ENZ0 ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
Use the following command to check the WWN of the Fibre Channel card that
corresponds to the physical path name. The result is displayed in the same order as
shown in Step 4-1.
# prtpicl -v -c scsi-fcp | grep port-wwn
Example
# prtpicl -v -c scsi-fcp | grep port-wwn
:bfa0-port-wwn
:bfa1-port-wwn
Add the results in the "WWN instance management table for the server".
Example
Physical slot name
WWN
PCIE1
100000051ee7457b
PCIE2
100000051ee7457c
Check the controller number of the target connected to the Fibre Channel card.
Use the following command to check the controller number of the target connected to
the Fibre Channel card. The controller number corresponds to the physical path dis-
played in Step 4-1.
# cfgadm -v
Example
Ap_Id Receptacle
When Type
c2 connected
unavailable fc-fabric
c3 connected
unavailable fc-fabric
Add the results in the "WWN instance management table for the server"
Physical slot name
WWN
PCIE1
100000051ee7457b
PCIE2
100000051ee7457c
10:00:00:05:1e:e7:45:7b
10:00:00:05:1e:e7:45:7c
Controller Instance
name
name
bfa0
bfa1
Occupant Condition
Busy phys_ID
configured unknown
n /devices/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0:fc
configured unknown
n /devices/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0:fc
Instance
Controller
name
name
C2
bfa0
bfa1
C3
11
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
Information
.
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
End of procedure
Copyright 2010 FUJITSU LIMITED