Table of Contents
Advertisement
1.
Close the computer.
2.
Turn the computer upside down with the front toward you.
3.
Remove the two rubber feet (1).
NOTE:
4.
Remove the ten Phillips PM2.5×6.5 screws (2) that secure the top cover to the base enclosure.
5.
Remove the two Phillips PM2.0×2.0 broad head screws (1) in the optical drive bay that secure the top
cover to the base enclosure.
42
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The rubber feet are included in the Rubber Kit, spare part number 746669-001.
Advertisement
Table of Contents
