movistar AW4062 Installation Manual page 7

If you are equipped with an external
wireless device (PCMCIA or USB adap-
ter), install it with the aid of the CD that
is provided with it. If you have a wireless
device that is already integrated into your
equipment, make sure that it is enabled
with the aid of your operating system.
Connection using WPS
The router can use WPS for setting up a
secure wireless network. Your wireless
client device must support WPS for using
it. Otherwise, use the method explained
in "Connection using Windows wireless
client". Press the button
the back of the router for more than eight
seconds and release it. The WPS indicator
will start to blink in yellow.
For further information please refer to section 3.5 of the user's manual on the advanced settings CD
located at
1
Press the WPS button on the wireless
client device (check the device's documen-
tation to see the details about this) while
the WPS indicator is blinking. You have
two minutes for setting up the connection
using WPS and, after this time, the router
doesn't allow connection using WPS any
more.
ETHERNET
WLAN WPS CONEXIÓN
2 3 4
INTERNET
7