movistar AW4062 Installation Manual page 6

Start using your ADSL...
5. Connecting the computer to the router. Two options are available
You may either connect your computer to the router using an Ethernet cable if they are
sufficiently close to each other or by means of a wireless network. Furthermore, you can
simultaneously have certain items of equipment connected to the router using the Ether-
net cable and others as portable through the wireless network.
A. Connection using wireless network
You can use the wireless network as long
as your computer is equipped with a wire-
less adapter installed or this is integrated
into your equipment.
The first step will be to enable the wireless
network for your router. This is done by
pressing the button
of the router for more than one seconds
and less than eight. The WLAN indicator
will light up in green and will blink when
navigating.
ADSL
RESET
The next step is to configure the compu-
ters on your wireless network in accordan-
ce with your router's wireless parameters.
For further information please refer to section 3.5 of the user's manual on the advanced settings CD
6
located at the back
ETHERNET
DC 15V-800mA
4x 3x 2x 1x
ON
OFF
The configuration parameters by default
for your wireless network are shown on
the label at the bottom of your router.
ETHERNET
ADSL DC 15V-800mA
ON
OFF
RESET
4x 3x 2x 1x