Using Your Headset; Using Your Headset To Handle Phone Calls; Using Your Headset To Listen To Music; Using Your Headset With Two Devices Simultaneously - Sony SBH60 User Manual

Using your headset

Using your headset to handle phone calls

Use the headset to handle incoming calls, for example, to answer or reject a call. You
can also switch between different ongoing calls.
The number of ongoing calls supported can vary depending on the phone operator or
network.
To answer a call with the headset
•
When you hear an incoming call signal, press the Call key.
To end a call
•
During an ongoing call, press the Call key.
To reject a call
•
When you hear an incoming call signal, press and hold down the Call key.
To answer a second call
•
When you hear an incoming call signal during an ongoing call, press the Call
key. The ongoing call is put on hold.
To reject a second call
•
When you hear an incoming call signal during an ongoing call, press and hold
down the Call key.
To switch between ongoing calls
•
Press the Call key twice in rapid succession.

Using your headset to listen to music

You can listen to music from your phone or another Bluetooth® compatible device
using your headset.
To listen to music
1
Open the music player application in your Bluetooth® device and select a track
that you want to listen to.
2
To play the track, press the Music key.
3
To pause the track, press the Music key again.
To move between tracks
1
To skip forward to the next track, press and hold down the Volume up key.
2
To skip back to the previous track, press and hold down the Volume down key.

Using your headset with two devices simultaneously

Your headset has two different connection modes: Multipoint mode and Singlepoint
mode. Multipoint mode helps you manage two connections at the same time. For
example, if you connect your headset with two phones, you can receive calls from
both phones without having to disconnect and reconnect.
Singlepoint mode is enabled by default. If you want to use your headset with two
devices at the same time, you should switch to Multipoint mode manually.
You can only connect to a maximum of two devices in Multipoint mode. If you pair the headset
with a third device, the first paired device gets disconnected.
This is an Internet version of this publication. © Print only for private use.
8