Table of Contents
Advertisement
installation & preparation
NOZZLE REVIEW
Various nozzles may be quick-connected into the end of the wand to
change the spray pattern or use the detergent feature. When using Quick
Connects (Q.C.), be certain the connection is securely locked. If not, the
high pressure water may shoot the nozzle from the wand, causing severe
injury or serious damage. To determine spray fan, refer to the actual num-
ber stamped on the nozzle. The first two digits indicate the spray fan in
degrees, i.e.; 00=0", 15=15°, 40=40°.
1. The 0° nozzle (RED): This is a blasting nozzle. It delivers a very con-
centrated stream of water. Be cautious when using the straight narrow
stream. It is not recommended for use on painted or wood surfaces,
or items attached with adhesive backings. Uses: Removing weeds
from sidewalk cracks, stubborn stains from concrete, masonry, alumi-
num and steel, caked mud from equipment, and cleaning lawn mower
undersides.
2. The 15° nozzle (YELLOW): This is a chiseling nozzle. The spray should
be directed at a 45° angle to the surface and used like a scraper to
remove paint, grease and dirt. Uses: Surface preparation (removing
mildew stains and paint chips).
3. The 40° nozzle (WHITE): This is a wash nozzle. This wide spray pattern
disperses the water pressure over a large area and is recommended
for moderate washing. Uses: Washing aluminum siding, cleaning win-
WARNING
dows, washing vehicles, spraying sidewalks, driveways, and patios.
RISK OF INJECTION CAUSING
SEVERE INJURY!
NEVER LOOK DIRECTLY AT THE
NOZZLE ORIFICE UNLESS IT
NEVER LOOK DIRECTLY AT THE NOZZLE ORIFICE UNLESS IT
IS DISCONNECTED FROM THE
IS DISCONNECTED FROM THE GUN/WAND ASSEMBLY!
GUN/WAND ASSEMBLY!
CONNECTION OF Q.C. NOZZLES
CONNECTION OF Q.C. NOZZLES
QUICK-CONNECT (Q.C.)
0°
WARNING
RISK OF INJECTION CAUSING
SEVERE INJURY!
NEVER LOOK DIRECTLY AT THE
NOZZLE ORIFICE UNLESS IT
IS DISCONNECTED FROM THE
GUN/WAND ASSEMBLY!
CONNECTION OF Q.C. NOZZLES
NOZZLE REVIEW:
Various nozzles may be quick-connected into
WARNING
spray pattern or use the detergent feature. W
be certain the connection is securely locked
may shoot the nozzle from the wand, causing
To determine spray fan, refer to the actual num
first two digits indicate the spray fan in degre
QUICK-CONNECT (Q.C.)
QUICK-CONNECT (Q.C.)
1. The 0° nozzle (RED): This is a blasting noz
stream of water. Be cautious when using
0°
not recommended for use on painted or
with adhesive backings. Uses: Removi
15°
stubborn stains from concrete, masonry,
from equipment, and cleaning lawn mow
2. The 15° nozzle (YELLOW): This is a ch
40°
be directed at a 45° angle to the surface a
paint, grease and dirt. Uses: Surface pre
and paint chips).
QUICK-CONNECT FITTING
3. The 40° nozzle (WHITE):
This is a wash nozzle. This wide spray pa
over a large area and is recommended for m
aluminum siding, cleaning windows, wash
NOZZLE REVIEW
Various nozzles m
spray pattern or u
be certain the co
may shoot the no
To determine spra
INSTALLATION & PR
first two digits ind
1. The 0° nozzle
stream of wa
not recomme
with adhesive
stubborn stai
from equipme
2. The 15° nozz
be directed a
paint, grease
and paint chip
3. The 40° nozz
This is a wash
over a large ar
aluminum sid
driveways, an
NOZZLE CONNE
1. Be certain the
2. The nozzle as
at this by retr
the nozzle.
WATER SUPPLY
1. Select a water
at least 3/4" I
15
2
Check the wat
As a strainer
Advertisement
Table of Contents
