Table 11 - Type Of Fax Device; Screenshot 21 - Selecting The Type Of Fax Hardware To Be Used With Gfi Faxmaker - GFI FaxMaker Getting Started Manual

Screenshot 21 - Selecting the type of fax hardware to be used with GFI FaxMaker

5. Select the fax devices to use with GFI FaxMaker.
IMPORTANT: Ensure that devices are properly installed before proceeding.
Instructions are available in the GFI FaxMaker Fax Device Installation manual,
available from:
http://www.gfi.com/faxmaker/manual

Table 11 - Type of fax device

F
AX DEVICE
Brooktrout by Dialogic
ISDN, CAPI devices
Fax modems
Click Next to continue.
NOTE: For some devices, you may be prompted to configure the fax lines. For more
information, refer to the Fax Lines section in GFI FaxMaker Administration &
Configuration manual available from http://www.gfi.com/faxmaker/manual.
GFI FaxMaker
D
ESCRIPTION
Select the board model to use and click Next. Click Yes to install driver
software for the device, or click No to use other drivers.
Select:
»
TE-SYSTEMS XCAPI Fax over IP - Instructs GFI FaxMaker to use the TE-
SYSTEMS XCAPI Fax over IP solution. Click Yes to install XCAPI software to
integrate the system with Fax over IP or an ISDN controller, or click No to
use other drivers.
»
Other devices - Instructs GFI FaxMaker to use a device that is not TE-
SYSTEMS XCAPI Fax over IP.
Select to automatically detect fax modem drivers and click Next. GFI FaxMaker
attempts to detect Microsoft Fax drivers and other modems already installed
on the machine.
Installing GFI FaxMaker | 29