HIKVISION E Series User Manual page 90

User Manual of E Series 5 Inch Network Speed Dome
Example:
When the speed domes are connected to the same router, you can forward the
ports of a speed dome as 80, 8000, 8200~8210 and 554 with IP address
192.168.1.23, and the ports of another speed dome as 81, 8001, 8201~8211 and
555 with IP 192.168.1.24. Refer to the steps as below:
Steps:
1. As the settings mentioned above, forward the port 80, 8000, 8200~8210 and 554
for the network speed dome at 192.168.1.23
2. Forward the port 81, 8001, 8201~8211 and 555 for the network speed dome at
192.168.1.24.
3. Enable ALL or TCP protocols.
4. Check the Enable checkbox and click
Note: The port of the network speed dome cannot conflict with other ports. For
example, some web management port of the router is 80. Change the speed dome
port if it is the same as the management port.
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
Figure A.2.3 Port Mapping
.
89