Camera Adjustment - Xineron Full-HD NETWORKBOX CAMERA Instruction Manual

Note: Video Output is used for an easy zoom and focus control when installing lens. After lens
installation, you must set Video Switch to Off to provide the best performance of the
Network Camera.
• LED Indicators
LED Color
Green
Network
Amber
Unlit
Status Red
Power Green
Note: Steady green and red during booting. Flash green and red during factory default.

1.4 Camera Adjustment

1) Video auto IRIS installation & adjustment
The camera supports video-type auto iris lenses which adjust to changing light levels.
Perform the following steps to install and adjust a video-type auto iris lens.
If necessary, solder the lens control wires to the connector supplied with the camera.
1. Attach the video-type auto iris lens to the lens mount on the front of the camera.
Pin Name
1 Voltage +
2 Open
3 Video
4 Ground
Steady for connection to a 100 Mbit/s network. Flashes for
network activity.
Steady for connection to 10 Mbit/s network. Flashes for
network activity.
No network connection.
Steady red for failed upgrade or booting.
Steady green for normal operation or booting.
Flashes green during firmware upgrade.
Red
-
White
Black
10
Indication
Wire Color