Wireless Access Control Page - Compal CH6643E User Manual

Click or press the WPS button on the CH6643E's front panel or select Push
1.
Button Configuration (PBC) option radio then click "Connect" button in the
web page "Home / Gateway / Wireless / WPS", the wireless LED will flash
with orange color.
2. Click or press the WPS button on the wireless device within 120 seconds.
3. If WPS connection successfully established, the wireless LED will turn
green.
PIN
In web page "Home / Gateway / Wireless / WPS", select Personal
1.
Identification Number (PIN) option radio then a "PIN" column will appear.
Enter the wireless device's PIN code that is normally printed on the device's
2.
sticker or generated by connection manager of that device.
Click "Connect", then the wireless LED will flash with orange color.
3.
4. Start PIN registration process by connection manager of that device within
120 seconds.
5. If WPS connection successfully established, the wireless LED will turn
green.
The countdown timer will start after you click "Connect" button

Wireless Access Control Page

This page allows you to configure the Access Control to the AP on the connected clients.
47