Advanced Ip Filtering Page - Compal CH6643E User Manual

Field Descriptions for the Advanced Options Page
Field
UPnP Enable
PassThrough Mac Addresses
When done, click Apply to save your changes.

Advanced IP Filtering Page

This page allows you to define which local PCs will be denied access to the CH6643E
WAN. You can configure IP address filters to block Internet traffic to specific network
devices on the LAN by entering start and end IP address ranges. Note that you only need
to enter the LSB (Least-significant byte) of the IP address; the upper bytes of the IP
address are set automatically from the CH6643E Configuration Manager's IP address.
The Enabled option allows you to store filter settings commonly used but not have them
active.
Description
Turns on the Universal Plug and Play protocol (UPnP) agent
in the configuration manager. If you are running a CPE (client)
application that requires UPnP, select this box.
Checkmark Enable to turn on this option.
Specifies up to 32 computers as pass-through clients not
subject to NAT, using their MAC addresses.
To enable this feature, your cable operator may need to
provide additional public IP addresses.
29