Compal CH6643E User Manual page 15

There must be .10 inches (2.5 mm) between the wall and the underside of the screw
head.
7. Place the CH6643E so the keyholes on the back of the unit are aligned above the
mounting screws.
8. Slide the CH6643E down until it stops against the top of the keyhole opening.
9. After mounting, reconnect the coaxial cable input and Ethernet connection.
10. Plug the power cord into the +12VDC connector on the gateway and the electrical
outlet.
11. Route the cables to avoid any safety hazards.
12