TP-Link TD-W8970 User Manual page 31

TD-W8970
 Set IPv6 DNS Server manually: Choose "Set IPv6 DNS Server manually", you can set IPv6
DNS Server manually here. The modem router will use this IPv6 DNS Server for priority.
 Host Name: Here displays model No. of your modem router.
Click the Save button to save the settings.
4.5.1.3 PPPoE
If your ISP provides a PPPoE connection and you need to use an ATM Interface, choose PPPoE
in the drop-down list, and then the screen will be displayed as below.
PPP Username/Password/Confirm Password: Enter the User Name, Password and

Confirm Password provided by your ISP. These fields are case-sensitive.
Connection Mode: For PPPoE connection, you can select Always on or Connect on

demand or Connect manually. Connect on demand is dependent on the traffic. If there is no
traffic (or Idle) for a pre-specified period of time, the connection will tear down automatically.
And once there is traffic send or receive, the connection will be automatically on.
Authentication Type: Select the Authentication Type from the drop-down list, the default

method is AUTO_AUTH, and you can leave it as a default setting.
Enable IPv4: Check this box to enable IPv4.

300Mbps Wireless N Gigabit ADSL2+ Modem Router User Guide
Figure 4-7
22