Britax KIDFIX XP User Instructions

PAGE I
1. PRODUCT OVERVIEW
03
04
05
06
01 02
07 08
ISOFIX fastening points (vehicle) Belt guide (bright red)
01 05
ISOFIX insert guides ISOFIT locking arms
02
06
Belt holder (dark red) Release knob
03 07
XP-SICT (only KIDFIX XP SICT)
Safety button
04
08
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle. The seat can be used in vehicles with ISOFIX anchoring systems
(see type list) and in vehicles with a 3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The KIDFIX XP / KIDFIX XP SICT is approved for two different methods of installation:
Symbol Installation type Approval type
with the ISOFIT locking arms on the
semi-universal
ISOFIX fastening points in the vehi-
cle. Observe the vehicle type list.
with the vehicle's 3-point seatbelt universal
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version
can be obtained from us or from www.britax.eu / www.roemer.eu.
You can use your child safety seat as follows:
In the direction of travel Yes
1)
Against the direction of travel no
with 2-point belt no
2)
with 3-point belt Yes
15–36 kg
with ISOFIX fastening points Yes
(between seat surface and
backrest)
3)
on front passenger seat Yes
on outer rear seat Yes
on centre rear seat (with
4)
Yes
3-point belt)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
12
13
11
14
10
09
ISOFIT settings key
09
Seat cushion
10
XP-PAD
11
Adjusting handle of the headrest
12

5. CARE AND MAINTENANCE

Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer or from an ADAC office.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
Section
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
9A
a) any caustic cleaning agents (such as solvents).
DANGER!
The child seat must not be used without the seat cover.
9B
Removing the seat cover
1. Moving the headrest of the vehicle seat into the top
position.
19
2. Unhook the cover hook 19 on the rear of the backrest.
3.
Remove the top part of the cover and fold it forwards to
the seat surface.
4.
Unhook the cover hook 19 on the front of the backrest.
5.
Pull the cover off of the seat surface.
19
Removing the headrest cover
6.
Unhook the cover loop 20 on the rear of the backrest.
7. Unhook the cover hook 19 on the front of the backrest.
8. Pull off the cover of the headrest 03 .
20
► The cover can now be washed. Please observe the
instructions on the washing label of the cover:
03
Re-fitting the cover
Proceed in reverse order to put on the cover.
19
2. INTRODUCTION
We are delighted that our
ny your child through a new stage in its life.
In order to protect your child correctly, the
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
These instructions use the following symbols stated below:
Symbol Keyword
DANGER!
WARNING!
CAUTION!
TIP:
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
Storage compartment agonal seat belt in dark red and the lap belt
16
13
in bright red. The colour of the belt guides
Backrest 15
14
on the child safety seat follows the same colour
scheme.
6. DISASSEMBLY AND DISPOSAL
UNFASTENING YOUR CHILD:
1. To unfasten your child, use the release button of your vehicle seat buckle.
TIP! The XP-PAD can remained applied for easier use on the diagonal
belt of your vehicle, the diagonal belt must be retensioned before every
journey; see: Section10 step 12 [page II].
REMOVAL:
1. Operate the release key of your vehicle seat buckle
16 11
2. Open the XP-PAD
3. Open the dark red belt holder
03
4. To release the ISOFIT fastening, release the green
07 08
►The child safety seat can now be removed.
secured when it is in the vehicle, even if no child is
being transported.
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging
Seat cover
Plastic parts
Metal parts
Belt straps
buckle and tongue
3. Certification
KIDFIX XP / KIDFIX XP SICT
can safely accompa-
BRITAX RÖMER
Child safety seat
KIDFIX XP/ KIDFIX XP SICT
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
*ECE = European Standard for Child Safety Equipment
E.: info@de.britaxeurope.com
www.roemer.eu
The child safety seat has been designed, tested and certified according to
the requirements of the European Standard for Child Safety Equipment (ECE
T.: +44 (0) 1264 333343
R 44/03). The seal of approval E (in a circle) and the approval number are
F.: +44 (0) 1264 334146
E.: helpline@uk.britaxeurope.com located on the orange approval label (sticker on the child safety seat).
www.britax.eu
DANGER! This approval will be invalidated if you make any modifications
Explanation
Risk of severe personal injury WARNING! Use the KIDFIX XP / KIDFIX XP SICT exclusively for secur-
Risk of minor personal injury
DANGER! Never secure your child or the child safety seat with a 2-point
Risk of material damage
Useful notes
16
15
15 to 36 kg
(~4 to 12 years of age)
on the Velcro fastener and
11
remove the diagonal belt .
16
by pressing back-
03
wards the key on the belt holder 03 and unthread-
ing the diagonal belt 16 .
Only for installation type A (ISOFIT):
safety button and the red release button first
08 07
on the one and the on the other side opposite on
another.
DANGER! the child safety seat must always be
Container for cardboard boxes
Residual waste, thermal utilisation
According to the labelling in the
corresponding container
Container for metals
Container for polyester
Residual waste www.britax.eu
Testing and certification
In accordance with ECE* R 44/04
Group Body weight
KIDFIX XP
II+III 15 to 36 kg
KIDFIX XP SICT
to the child safety seat. Only the manufacturer is permitted to
make modifications to the child safety seat.
ing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
KIDFIX XP
KIDFIX XP SICT
User instructions