Table of Contents
Advertisement
¡¤ The outside line placed on hold will flash
green at your keyset, and show a steady
red light on all other keysets.
2. After placing a call on hold, you can answer
or make another call.
3. To retrieve the held outside line, press the
blinking line button.
3NOTE
¡¤ You must press [HOLD] the second time within 2
seconds
after pressing the first [HOLD] in Step 1.
¡¤ If a held line is not released within a
predetermined time, the system rings you back,
so that you do not forget about the call. If you
do not answer the call, it is automatically
recalled to the operator group. (Operator group is
station group numbered 500)
/
To Place an Intercom Call on
Exclusive hold
1. When connected to any station, press [HOLD]
once.
¡¤ The station's [DSS] button will blink at your
keyset, and show a steady red light on
other keysets.
2. After placing a call on hold, you can answer
or make another call.
3. To retrieve the held call, press the
blinking [DSS] button.
3NOTE
Intercom calls will always be placed on exclusive
hold.
CALL PROCESSING
7
Advertisement
Table of Contents
