4.0
M
C
AJOR
OMPONENTS
The 10Kva RT is composed of three major assemblies to provide easier handling, installation
and versatility.
4.1
Main Frame and Electronics
This 6U cabinet arrives without internal batteries to lighten the UPS for easier installation. Once the
cabinet has been placed in its final floor or rack position, the internal batteries may be installed. The
UPS is shipped with standard hardwire terminal blocks for input and output connections.
Figure 1
10Kva RT Dual Inverter (front and rear views)
FRONT VIEW
Battery Compartment (behind front bezel);
Internal Battery Pack is shipped loose
(See Section 4.2)
4.2
Internal Battery Pack
The center front bezel can be removed by unscrewing the side mounted screws to reveal the battery
access plate. The cover plate can be removed by extracting the three screws at the top of the cover
plate and lifting the plate off. The two internal battery packs are compact assemblies ready to slide
into the battery compartment after the front battery access plate has been removed. Electrical
connection is made with the two slotted battery connectors.
Figure 2
Internal battery pack and connector
Status Indicators
and Controls
Front Bezel
External Battery
Connectors
Output
Circuit
Breaker
Hardwire
Knockouts
Support Base
7
Major Components
REAR VIEW
DB-9
Communications
Ports, 2
Battery connector
on front of battery pack
®
Intelligent
Cooling Fan,
1 of 3
REPO
Switch
UPS/Bypass
Breaker
Input Circuit
Breaker