Table of Contents
Advertisement
Figure 1. Location of Voltage Switch on the Power Supply
Figure 2. Installing Mounting Ears and Handles for a Standard Equipment Rack
Figure 2.1. Installing Mounting Ears for a Telco Rack
Figure 3. Rack-Mount Brackets
Figure 4. Fastening the Right Bracket to the Rack
Figure 5. Fastening the Left Bracket to the Rack
Figure 6. Lowering the Shelf
Figure 6.1. Securing the Shelf
Figure 7. Moving the Unit into a Standard Equipment Rack
Figure 7.1. Moving the Unit into a Telco Rack
Figure 8. Placing the Unit in a Standard Equipment Rack
Figure 8.1. Placing the Unit in a Telco Rack
Figure 9. Securing the Unit to the Rack
Figure 10. Detail of Power Units
Figure 11. IntraPort Carrier-8 Configuration Example
Figure 12. Removing and Replacing an RIOP Card or Cover Plate
Figure 13. Removing the Filter Cover Plate
Table of Contents
5
6
6
7
8
9
10
10
11
11
12
12
13
14
20
27
28
i
Advertisement
Table of Contents
