Keeping The Artis Se Up To Date; Do You Have Everything; Before You Start - Kurzweil Artis SE Getting Started

Hide thumbs Also See for Artis SE:

Table of Contents

Introducing Artis SE

Keeping the Artis SE up to date

Be sure to check the Kurzweil Music Systems website at http://www.kurzweil.com for new

documentation and the latest software updates for Artis SE.

Your Artis SE package should contain the following in addition to your instrument:

• Power adapter and cable

• Switch pedal

• USB cable (Type-A-to-Type-B)

• 4 self adhesive feet

• Artis SE Getting Started guide (this book)

If you don't have any of these components, please contact your Kurzweil / Young Chang

dealer to get them.

Don't connect anything until you make sure the Artis SE is properly and safely situated.

If your Artis SE keyboard has been out in the cold, give it time to warm up to room

temperature before starting it, since condensation may have formed inside.

Setting up the Artis SE

1. Set the keyboard on a hard, flat, level surface.

2. Four adhesive-backed rubber feet are provided with Artis SE. Carefully turn the keyboard

over onto a soft surface, remove the paper backing from the rubber feet and attach them.

NOTE : Unless the instrument will always be used with a

keyboard stand, attachment of the rubber feet is strongly

advised. Otherwise protruding screws will scratch the tabletop

and may increase the key action sound.

Table of Contents