Introducing Artis SE
The Rear Panel
The Kurzweil CC-1 continuous control pedal will work best with the Artis SE, but it is also
possible to use third-party continuous control pedals designed for synthesizers.
NOTE : Only CC pedals should be connected to the CC pedal
input.
The Headphones Jack
Use the HEADPHONES jack to listen to the Artis SE on stereo headphones. The headphone
jack is located at the rear of the instrument, near the power switch. You will need a 1/4-inch-
to-1/8-inch adapter in order to use headphones that have a smaller mini plug connector.
9