Table of Contents
Advertisement
Introducing Artis SE
Front Panel Overview
Category Select and Multi/Program Select Buttons (17)
Categories make it easy to select Artis SE sounds by instrument type. The row of 8
category buttons represent two groups, providing a total of 16 categories, as labeled. Use
the button on the left labeled "Category" to switch between the 2 groups of 8 categories
(an LED will light to indicate the current group).
In Program Mode, Programs strictly follow the labeled category instrument types. In Multi
Mode, similar Multis are grouped together in Categories, but the instrument sounds used
may not always match the category name.
In Multi Mode, the buttons numbered 1-8 allow you to select the Multis available within
the current Category. Pressing and holding the current Category button will set the
current Multi as the default for that category (only if the current Multi belongs to the
category of the button pressed). User Multis are arranged in 2 banks, for a total of 16 User
Multis within each Category. Use the BANK button to the left of the display to switch
between banks.
In Program Mode, the buttons numbered 1-8 will select the Programs available within
the current Category. Programs are arranged in 2 banks, for a total of 16 Programs within
each Category. Use the BANK button to the left of the display to switch between banks.
Pressing and holding the current Category button will set the current Program as the
default for that category (only if the current Program belongs to the category of the button
pressed).
Category and User Buttons (18)
The User button allows you to access User-modified Multis or Programs (when in Multi
or Program Mode, respectively). User Multis and Programs are arranged in 2 banks, for
a total of 16 Programs within each Category. Use the BANK button to the left of the
display to switch between banks.
The User button allows you to access 8 additional User-modified Multis or Programs in
each Category (when in the appropriate Mode). If there are no User Multis or Programs,
the message "No User Multis" or "No User Programs" will be displayed momentarily.
To create a User Program or User Multi, use the EDIT and SAVE buttons.
Favorites (11)
The six Favorites buttons allow Programs and Multis to be saved and quickly re-selected.
Pressing a Favorite button will load the favorite Program or Multi stored in that location.
To save the current Program or Multi as a Favorite, hold down any of the Favorite
buttons for 3 seconds. When the Favorite has been successfully saved, you will be notified
by a message temporarily displayed on the LCD screen.
18
Advertisement
Table of Contents
