K.M.E. Versio VSS 28 User Manual page 9

Preset
To operate the respective system efficiently, the correct preset has to be chosen. Please
choose and load your current setup in this Menu Item of the VSS 28. You have the
possibility to choose the Factory Presets for a VERSIO system of K.M.E. (see 6.) or to
create, adapt or personalize User Presets for your own audio system. The following
LEDs indicate the chosen preset:
1 2
F P
ACTORY RESETS
1) Preset for the audio system Versio SD 1
2) Preset for a alternative Versio system
3) Preset for operating without top units; Note: signal Output „Out A" and „Out B" are
not active
4) Preset for operating without subwoofer; Note: the loudspeakers of the VSS 28 are
muted
U P
(see 7.3)
SER RESETS
Note: Parameter selection in the Menu Item "Mode" are NOT available.
5) User Preset 1
6) User Preset 2
7) User Preset 3
8) User Preset 4
1 2
U P
SER RESET PROGRAMMING
Note: ONLY available when an SD Card with valid files has been inserted (see 7.3)
1) Save User Preset 1 from the SD Card to the device (old preset will be DELETED!)
2) Save User Preset 2 from the SD Card to the device (old preset will be DELETED!)
3) Save User Preset 3 from the SD Card to the device (old preset will be DELETED!)
4) Save User Preset 4 from the SD Card to the device (old preset will be DELETED!)
For more information about User Preset programming, see 7.3.
3 4
3 4
5 6 7 8
9