Table of Contents
Advertisement
7. Operation
The system unit VSS 28 offers a simple and comprehensive menu navigation. The menu
can be operated by using the three Menu Item buttons ("Input", "Mode" and "Preset") and
the control (System Volume or Limiter). The LED menu indicators and the multicolor LED
of the operating status give an exact overview over the current operating mode and the
chosen settings. The next sections provide you with important information on operating
the device. Please read this section carefully in order to prevent damage to the
device and to people!
• 7.1 Menu Items
A
DJUST THE PARAMTER
Push the chosen Menu Item button for approx. 1 second,
until LEDs are flashing.
Now, push the Menu Item button briefly and choose the
desired parameters.
Save your new settings by pushing the menu item button
again for approx. 1 second.
M
ODE
indicator LEDs continuously light up – Operating Mode enabled
indicator LEDs flashing – Configuration Mode enabled
The options you have in adjusting the respective menu items are explained in the
following sections.
Input
To use the VSS 28 flexibly and efficiently, the signal input and the channel operating
mode (Mono or Stereo) can be chosen in this Menu Item. The following settings are
possible:
1
2
A
NALOGUE INPUT SIGNAL
1) Default setting – stereo mode with the analogue input signals on Channel A and B
2) Mono mode with the analogue input signal on Channel A
3) Mono mode with the analogue input signal on Channel B
D
IGITAL INPUT SIGNAL
4) Stereo mode with the digital Input signal on Channel A
5) Mono mode with the left audio channel of the digital Input signal on Channel A
6) Mono mode with the right audio channel of the digital input signal on channel A
A
UTOMATIC
7) Automatic input signal detection – LED indicator signalizes the applied input signal
(analogue or digital)
3
4
5
6
7
7
Advertisement
Table of Contents
