Inserting Chapter Markers Into A Title; Erase Section (Erase Sec) - Pioneer DVR-520H Operating Instructions Manual

08 Editing
• Preview – Preview chapters: Select the chapter you
want to play; press
edit screen.
• Undo – Undo the last command (only works with VR
mode disc edits).
3 Press RETURN to get back to the menu options on
the left side of the screen.
4 To return to the Disc Navigator screen, press
RETURN again, or select 'Back' from the menu
options on the left.
Note
• When editing VR mode Original content, it may not
be possible to erase chapters less than five seconds
long.
• It may not always be possible to combine two
chapters, even though they are adjacent. If a chapter
has been divided into three, then the middle chapter
erased, it is not possible to combine the two
remaining chapters into one.

Inserting chapter markers into a title

VR mode HDD
You can create new chapters within a title using the CHP
MARK button while playing the title or during recording.
This is useful not just for navigation of the disc content
but also for editing purposes.
1 Start playback of the title you want to create
new chapter markers in.
You can use the Play command from the Disc Navigator
menu to do this.
2 Press CHP MARK at any point where you want a
new chapter to begin.
A chapter marker icon appears on-screen briefly to
confirm a new chapter mark has been inserted:
80
En
STOP to return to the chapter
PAUSE
CHP
MARK
• For greater control over the exact position of chapter
markers it can be useful to use the
and/or the slow-motion and frame advance/reverse
/
controls ( ).
Note
• You cannot insert chapter markers during Auto Start
Recording.
• If you pause a recording in VR mode, the recorder
automatically starts a new chapter when you restart
the recording.
• When recording in Video mode, the recorder
automatically puts chapter markers in at regular
intervals. It is not possible to add extra chapter
markers manually after recording (see also Auto
Chapter (Video) on page 105).
• The Play List and Original content on a disc can each
contain up to 999 chapters.
• Each HDD title can contain a maximum of 99
chapters.
• Similar chapter editing commands are available for
HDD content from the HDD to DVD copy screen. See
also Copying from HDD to DVD* on page 61.

Erase Section (Erase Sec)

VR mode HDD
Using this command you can delete a part of an Original
title, ideal for cutting out the commercial breaks in a
recording made from the TV.
1 Select 'Erase Sec' from the Disc Navigator menu
options.
2 Use the (cursor buttons) to select a
title.
After selecting a title, the Erase Sec screen appears from
which you can mark the start and end points of the
section to erase.
Erase Sec
Original
DVD 15:00 Wed 13/12 2ch
Title 1
Recording Time
Erase Sec
Back
PAUSE button
LP
0h01m24s
1-1 0.00.52.17
Play Pause
A B
From To