Table of Contents
Advertisement
Programming the Oven
1
2
5
Please note:
•
The alert beep will cut off after two minutes if it is not switched off
manually.
Setting the clock
The clock is preset to 12:00, and will revert to this after a power failure.
When the current time indicator is flashing, touch
the correct time is shown on the display, the clock will set after
approximately five seconds' delay.
To change the clock once it has been set, touch
current time indicator flashes, then touch
time is shown on the display, the clock will set after approximately five
seconds' delay.
The minute minder
The minute minder can be used when the oven is switched on or off.
It can be set for up to 23 hours and 59 minutes.
3
4
6
7
1 Cooking time indicator
2 End of cooking time indicator
3 Minute minder indicator
4 Current time indicator
5 Decrease key
6 Mode key
7 Increase key
or . When
repeatedly until the
or . When the correct
fig. 1
9
Advertisement
Table of Contents
