Temperature Reporting; Remote Start Time-Out Alert; Pit Stop Mode - Clifford 4806X Owner's Manual

Note
The temperature and battery thresholds can be changed by
an authorized Directed dealer if a higher or lower threshold
is desired.

Temperature Reporting

During Remote start the vehicle interior is checked regularly for temper-
ature changes. If a change in temperature is detected this report will
be sent to the remote for display. Each time the remote receives this
report it will beep and display the temperature as described for the
Temperature Request in the Advanced Commands section Level 1.
Note
Temperature report must be turned on by an authorized Di-
rected dealer.

Remote Start Time-out Alert

During remote start a message is sent three minutes before and again
at one minute before the engine turns off. The
LED flash and several tones play as an alert to reset the runtime if
desired.

Pit Stop Mode

To exit vehicle with engine running
The system keeps the engine running during short trips into the house
or convenience store. To perform Pit Stop:
With the engine running, set the parking brake and release the
1.
foot brake.
Press the
2.
remote start is on.
22
button, the parking lights will turn on to indicate
LED, Remote Start
© 2013 Directed. All rights reserved.