Remote Control Command Table; Fault Condition Alerts - Clifford 4806X Owner's Manual

Remote Control Command table

Basic
Commands
Direct Access
Lock
Unlock
Remote Start
AUX
Aux/Trunk
Advance
Level, Change
Car (3 sec),
Enter program-
ming (8 sec)

Fault Condition alerts

If, when performing a command, a condition exists that does not al-
low activation of the remote start feature* a fault tone plays to alert of
the fault condition.
* Remote Start feature not available when the Remote Start status is
incorrect upon receiving the command. (Example: Runtime reset com-
mand received when remote start is off)
Refer to the notes included in the command descriptions that address
these faults or go to Remote Start Faults under the Remote Start Fea-
tures section for more details.
© 2013 Directed. All rights reserved.
Advanced Commands
x 1
Silent Lock
Silent Unlock Remote Valet
Reset Runtime Timer Start
AUX 1 AUX 2
Cabin Temp. Lock
Request Status
(2- way only) (2- way
only)
x 2 x 3
Car Finder
Smart Start
AUX 3
Runtime
Check
(2- way only)
x 4
Defogger
AUX 4
7