Manual Transmission Start (Mts Mode) - Clifford 4806X Owner's Manual

Turn the key to off, and remove it from the ignition, the engine
3.
continues running for the programmed runtime.
Exit the vehicle and lock the system.
4.
Note For Pit Stop on manual transmission vehicles follow the di-
rections in the Manual Transmission Start (MTS mode) sec-
tion with the door open.

Manual Transmission Start (MTS mode)

When installed into a manual transmission vehicle, the system requires
that the MTS mode is properly set when parking. If MTS mode is not
properly set or is defeated after being properly set the system will not
start the engine.
With the engine running, press the foot brake then set the parking
1.
brake and leave the engine running.
For Pit Stop or Turbo Timer mode (to leave the engine running
after locking), open the driver door.
Release the foot brake. As long as the engine is running there is
2.
no time limit to perform this step.
Within 20 seconds of foot brake release, press any command
3.
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command.
4. The parking lights flash 5 times to confirm MTS mode is enabled
and the remote start activates the ignition outputs.
Turn Off and remove the key from the ignition switch, the engine
5.
remains running.
Exit the vehicle, close all the doors and lock the system.
6.
7. The engine turns off. If the door is opened in Step 1 then the
engine continues to run.
© 2013 Directed. All rights reserved.
23