Quick Links



Table of Contents

Summary of Contents for Black & Decker VP900

  • Page 1 ® VP900...
  • Page 2: Table Of Contents

    Congratulations! On the purchase of your Black & Decker Paintmate. To ensure the best results from your Paintmate please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual concerning the Paintmate or the paint, please do not hesitate to call either Black &...
  • Page 3: Safety Instructions

    Paintmate user manual SAFETY INSTRUCTIONS manual. Have defective switches replaced by an Warning! When using electric tools, the following authorised service agent. Do not use your Paintmate basic safety precautions should always be taken to if the switch does not turn it on and off. reduce the risk of fire, electric shock and personal •...
  • Page 4: The Black & Decker Guarantee

    ENGLISH of the protection of the environment. FEATURES Black & Decker authorised service agents will accept old products and will dispose of them in an environmentally safe way. THE BLACK & DECKER GUARANTEE (UK, AUSTRALIA AND NEW ZEALAND ONLY) If your Paintmate becomes defective due to faulty materials and workmanship, within 24 months from the date of purchase, we guarantee to either replace all defective parts or at our discretion, replace the unit...
  • Page 5: Preparing Your Paintmate

    ENGLISH 1. Main body Lightly depress the latch 2. Handle (4), pull the handle 3. Lid forward and open the 4. Latch inside lid (3). 5. VersaPak battery holder 6. On/off switch 7. Sleeve nut 8. Handset 9. Trigger 10. Roller holder 11.
  • Page 6: Operating Your Paintmate

    ENGLISH To hold the tube and The motor and pump automatically switch on and off to connector in position, fit maintain correct paint supply pressure. The unit can be the side lugs in the two left on during short breaks in operation, but should be slots provided in the switched off if not intending to use for more than 1 hour.
  • Page 7: Cleaning After Use

    ENGLISH much paint will reach the roller. If this happens, The tube and roller may release the trigger and use the paint on the roller now be flushed with until more is required. water by attaching to • Immediately paint reaches the roller, start rolling on the tap connector (15) the wall/ceiling.
  • Page 8: Trouble Shooting Guide

    ENGLISH Flush out the brush by fitting to the handset in place of Fault Possible cause Remedy the roller holder, before removing from the tube and Paint drips Excessively Replace roller. washing the bristles under flowing water. from roller. worn roller. After cleaning allow all parts to become completely Paint flow guide Replace paint dry.
  • Page 9: Ec Declaration Of Conformity

    (If item still fails to flush, replace it.) EC DECLARATION OF CONFORMITY We declare that unit: VP900 conforms to 89/392/EEC The level of sound pressure of the tool is in accordance with EEC legislation. A weighted sound pressure <70dB (A) Brian Cooke - Director of Engineering Black &...
  • Page 10 Part no: 419790-00 6/97.2...
  • Page 12 Part no: 419790-00 6/97.2...

Table of Contents