Preparing Your Paintmate - Black & Decker VP900 User Manual

1. Main body
2. Handle
3. Lid
4. Latch
5. VersaPak battery holder
6. On/off switch
7. Sleeve nut
8. Handset
9. Trigger
10. Roller holder
11. Paint flow guide
12. Roller
13. Brush
14. Cleaning lock-on clip
15. Tap adaptor
16. Straps
17. Parking position
18. Paint tube
Important! For convenience, the roller and other parts
can be found inside your Paintmate. Please depress
the handle latch, pull the handle forward, open the
inside lid and remove and identify all the parts.

PREPARING YOUR PAINTMATE

12
13
Place your Paintmate on a stable flat surface.
To place the Dulux Handypack within your Paintmate,
proceed as follows:
Push the roller (12) or
paintbrush unit (13) onto
the end of the handset
with moderate force.
Your Paintmate can only
be used with paint from
Dulux Handypacks.
4
3
Gently squeeze any air from the top of the Handypack.
18
ENGLISH
Lightly depress the latch
(4), pull the handle
forward and open the
inside lid (3).
Shake the Dulux
Handypack gently
before removing the
cap. Unscrew the
Handypack cap and
retain it for future use.
Now attach the paint
tube (18) to the
Handypack. Push the
connector onto the
spout, twist clockwise to
lock in position.
Push the Handypack
firmly into the cavity,
keeping the paint tube to
the right (as you face the
unit). Always ensure the
bellows are completely
deflated before adding a
new paint bag. This can
be done by squeezing the
bellows with your hand.
5