Download Print this page

Black & Decker MZ32PCSSI User Manual page 11

Advertisement

English
Defrost by Weight
• Press the "Defrost"
display will show "dEF1", "
• Rotate the control dial to select the
weight of food to be defrosted. A figure
"g" will show in the display.
• Press "Start/+30Sec./Confirm"
key to start defrosting. The symbols "
and "
"will flash and "g" will go off.
Defrost by Time
• Press the "Defrost"
The oven will display "dEF2", "
"
".
• Rotate the control dial to set the required
cooking time up to the maximum of 95
minutes.
• Press the "Start/+30Sec./Confirm"
button to start defrosting. The symbols
"
" and "
" will flash in the display.
Note: Food weighing less than 200 grams
needs extra care to avoid overheating.
Quick Start
• Press the "Start/+30Sec./Confirm"
button to start cooking with 100%
power.
Note: Each time the "Start/+30Sec./
Confirm"
button is pressed while using
START/
+30SEC./
CONFIRM
the microwave, grill, combi-cooking or time
defrost functions, the cooking time will
increase by 30 seconds up to a maximum
of 95 minutes.
• While in the microwave, grill, convection
or combination modes, pressing the
"Start/+30Sec./Confirm"
increase the cooking time by 30
seconds.
button once. The
DEFROST
"and "
".
START/
button
+30SEC./
CONFIRM
button twice.
DEFROST
" and
START/
+30SEC./
CONFIRM
START/
+30SEC./
CONFIRM
START/
button will
+30SEC./
CONFIRM
-11-
• An alternative method is to rotate the
control dial (12) in an anti-clockwise
direction then press the "Start/+30 Sec./
START/
Confirm"
button to start cooking at
+30SEC./
CONFIRM
100% microwave power.
Note: This function does not work in
defrost, auto menu or multi-stage mode.
Auto Reheat
• Press the "Auto Reheat"
once. The display will show "150g",
and "
".
• The weight of food to be heated can be
changed by repeatedly pressing the
"Auto Reheat"
AUTO
REHEAT
control dial (12) until the required
amount of food is shown.
• Press "Start / +30 Sec. / Confirm"
button to start cooking.
Memory Function
• Repeatedly press the "Memory"
button to select memory programme 1,
2 or 3. The selected procedure will be
shown in the display.
• Press the "Memory"
the programme.
• Pressing the "Start/+30Sec./Confirm"
button at this point will start the
programme and also save it for future
use.
Note: Defrost and auto menu cooking
cannot be stored.
Example: To set programme 2 to to cook
at 80% microwave power for 3minutes and
20 seconds.
• Press the "Memory"
The display will show "2".
• Press the "Microwave"
The display will show "P80" and "
AUTO
button
REHEAT
button or rotating the
START/
+30SEC./
CONFIRM
button to save
MEMORY
START/
+30SEC./
CONFIRM
button twice.
MEMORY
button twice.
MICROWAVE
".

Advertisement

loading