Safety Of Others; After Use; Extension Cables & Class L Product; Parts Identification - Black & Decker MZ30PGSSI User Manual

Table of Contents

Advertisement

English

Safety of others

• This appliance is not intended for use by
persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• It is not recommended that this product
is used by children
• Children should be supervised to ensure
that they do not play with the appliance.
• Close supervision is necessary when
any appliance is used by or near
children.
• Never leave an appliance unattended
when in use.

After use

• Switch off and remove the plug from the
power outlet when not in use, before
assembling or disassembling parts,
cleaning or carrying out any
maintenance of the appliance. Never
pull the cord while removing it from the
power outlet.
• Keep children and animals away from
the unit and cord set.
Inspection and repairs
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
Electrical safety
This product must be earthed.
Always check that the power supply
corresponds to the voltage on the rating
plate
Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adaptor plugs with earthed (Class l)
appliances. Unmodified plugs and
matching outlets will reduce the risk of
electric shock.
Never operate an appliance directly below
the socket-outlet it is connected to.
The power outlet this oven is connected to
must be readily accessible so it can be
easily unplugged if necessary.
Do not insert any object into the openings
on the outer case.
Extension cables & Class l product
• A 3-core cable must be used as your
appliance is earthed and of Class l
construction.
• Up to 30m (100 ft) can be used without
loss of power.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised Black & Decker Service
Centre in order to avoid a hazard.
Parts Identification (Fig A)
1 Control panel
2 Turntable shaft
3 Roller support
4 Tray
5 Observation window
6 Door
7 Safety interlock system
8 Door handle
9 Grill rack
10 Grill elements
11 Mica plate (Do not remove)
12 Control dial
• Make sure that all packaging materials
have been removed before use.
• Inspect the oven after unpacking for any
damage such as a misaligned or
damaged door, dents or holes in the
door window and screen, and any dents
in the cavity. If any of these are seen,
DO NOT use the oven.
• Clean the appliance before first use.
-6-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents