Warning Display - FUTABA CGY750 Instruction Manual

3. Gyro gain
Gyro
4. Operating condition
Governor
5. Yaw rate comp.
Governor
6. Battery voltage
7. Setting Menus
RPM display
Governor
Home screen options
1. Maximum RPM
Governor
-
2. Engine runtime
Governor
3. OLED display options [default: Saver]
4. Operation mode [default: Gyro+Gov]
WARNING
If the operating mode has been changed, then the CGY750 must be reset
by powering down and then powering back up.
5. Roll rate maximum display
Read and memorize the current
neutral position.
-
-
Gyro
6. Elevator rate maximum display
W D
ARNING
Governor warning display
Sensor Error
Gyro
WARNING
The helicopter must remain motionless during the initialization process or
a [SensorER] sensor calibration error may occur.
-
- Low battery
WARNING
The [Low Batt] warning is displayed if the receiver battery voltage falls
below the [BAT/FS] voltage set within the CGY750 Governor Expert menu.
If this condition lasts for more than one second, then the Battery Fail Safe
function activates, and the throttle servo is brought back to idle position.
This is done to warn you that the battery voltage is dangerously low and that
you must land immediately.
-
Memory writing indicator
WARNING
Do not power off the CGY750 when the Memory writing symbol is dis-
played.
S M
ETTING
WARNING
Always exit the Setting Menu and return to the home screen before fly-
-
ing your model. The gyro operation is disabled within several of the set-
tings menus to ease set up.
Always check the operation of the CGY750, verify that the controls are
operating the correct direction and ensure the gyros are correcting in the
proper direction for all axes prior to attempting to fly the model.
-
-
-
8
Gyro
ISPLAY
Governor
ENUS
-
-
-
-
-
-