Installing The Adjustable Slicing Disc; Installing The Reversible Shredding Disc - KitchenAid KFP0711 Instructions Manual

Setting Up Your Food Processor
Installing the Adjustable
Slicing Disc
The Adjustable Slicing Disc is easily adjusted
and makes slicing tasks simple. Follow
these steps for adjusting and installing the
Adjustable Slicing Disc.
1. Holding the slicing disc, twist the
ridged portion of the shaft clockwise
for thinner slices, or counterclockwise
for thicker slices.
2. With the work bowl installed, hold
the slicing disk by the finger grips and
lower it onto the drive adapter.
TIP: You may need to turn the disc/drive
adapter until it drops down into place.
3. Install the work bowl cover, being sure
it locks into place.
Finger Grip
Finger Grip
Installing the Reversible
Shredding Disc
1. Holding the reversible shredding disc
by the 2 finger grips, insert the shredding
adapter into the hole in the bottom of
the disc.
2. With the work bowl installed, slide the
drive adapter onto the power shaft.
TIP: You may need to turn the disc/
adapter until it drops down into place.
3. Install the work bowl cover, being sure
it locks into place.
Finger Grip
Finger Grip
11