Battery Does Not Charge From Computer; Solving Setup Problems; Noise After Ink Installation - Epson WF-100 User Manual

Battery Does Not Charge From Computer

If you are unable to charge your product by connecting it to a computer, try these solutions:
• Check the battery setting on the product control panel.
1. Disconnect the USB cable.
2. On the product control panel, select Menu > Battery > Battery Settings > USB Power Supply via
PC > On.
3. Turn the product off and reconnect the USB cable.
• Make sure the product is off or in sleep mode.
• Make sure the computer is on and not in sleep or hibernate mode.
• Connect the product directly to the computer and not to a USB hub.
Parent topic:
Related concepts
Battery Charging

Solving Setup Problems

Check these sections if you have problems while setting up your product.

Noise After Ink Installation

Software Installation Problems
Parent topic:
Noise After Ink Installation
If you hear noises from your product after installing ink, check the following:
• The first time you install the ink cartridge, the product must prime its print head. Wait until priming
finishes before you turn off the product, or it may prime improperly and use excess ink the next time
you turn it on.
• If the product's print head stops moving or making noise, and the charging process has not finished
after approximately 5 minutes, turn off your product. Turn it back on and check to see if charging is still
in progress. If it is still in progress, contact Epson for help.
Parent topic:
Related references
Where to Get Help
Solving Power and Battery Problems
Solving Problems
Solving Setup Problems
124