Environmental Protection; Safety Instructions; Description Of Symbols - Eckman ECS01 Instruction Manual

Environmental Protection

Waste electric products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your local Authority or retailer for recycling advice.

Safety Instructions

Before using the chainsaw, please read the following instructions and follow them during operation! Before putting
this machine into operation, please study the instruction manual and pay special attention to the safety instructions.
Please "Save all warnings and instructions for future reference"
WARNING: Read and follow all safety precautions in the instruction manual. Failure to follow instructions could result
in electric shock, fire or serious injury to user. We highly recommend the use of an RCD (Residual Current Detector)
when using electrical equipment.

Description Of Symbols

Read the instruction manual carefully
Denotes risk of personal injury, loss of life, or damage to the tool in case of non-observance
Contact of the guide bar tip with any object should be avoided. Tip contact may cause the guide bar
to move suddenly upward and backwards, which may cause serious injury to user.
Two hands are always to be used in operation of the chainsaw.
WARNING: To reduce the risk of electric shock and not expose unit to water or operate unit on wet
Remove the plug from the socket or mains immediately before carrying out any adjustments,
servicing or maintenance or if the cable is damaged or cut.
Obtain and wear eye and ear protection at all times while operating the power tool.
Use protective gloves
Wear sturdy, non-slip footwear
ground
- 2 -